*MODEL/ENGINE SPECIFICATIONS
W/PERFORMANCE TEST

(TO BE USED AS REFERENCE ONLY)
1998
370SDA
MERC 7.4L MPI HORIZON
T-380

OVERALL LENGTH: 37’6”
LENGTH W/BOW PULPIT:
LENGTH W/SWIM PLATFORM: 40’
BEAM: 12’7”
DRAFT (INBOARDS): 32”
DEADRISE (DEGREES): 20
DRY WEIGHT: 17,000 POUNDS (1)
WATER CAPACITY: 70 GALLONS
FUEL CAPACITY: 275 GALLONS
OVERALL HEIGHT FROM WATERLINE: 98”W 124”SP (W=WINDSHIELD, SP=SPOILER
OVERALL HEIGHT FROM KEEL: 123”W 149”SP HT=HARD TOP, V=VENTURI)

MERC 7.4L MPI: T-380
TRANSMISSION/GEAR: BW VELVET 5000
SHAFT (DIAxLENGTH): 1.5” x 73.19” (2)
PROP SIZE (DIAxPITCH): 18 x 22 3BC BRONZE (C=CUPPED, S=STRAIGHT)
GEAR REDUCTION RATIO: 2.00:1

RPM @ CRUISE: 3000 (3)
SPEED @ CRUISE: 18 - 22 MPH (4)
SPEED @ CRUISE: 15.8 - 19.3 KNOTS (4)
FUEL USAGE @ CRUISE: 28.2 GPH (5)

W.O.T. RPM: 4800
W.O.T. SPEED: 36 - 40 MPH (4)
W.O.T. SPEED: 31.6 - 35.2 KNOTS (4)
FUEL USAGE @ W.O.T.: 64 GPH (5)

************************************************** *****************************

{1} Weight shown is boat with standard engine and most optional equipment.
{2} Shaft length is from coupling face to shaft end.
{3} CRUISE RPM shown is a selected base to be used as reference. Actual cruising RPM may vary from person to person depending on preference.
{4} MPH and KNOTS are calculated using optimum trim of boat with and without using trim tabs. Prop condition can affect speed.
{5} GPH is usage on both engines. Readings are based on engine manufacturer’s dynamometer tests and is to be used as a reference only. Actual operational specs may vary with sea conditions and boat loading.

NOTE: All data recorded at sea level. Variations in loading, altitude, temperature, and sea conditions will affect performance and may result in lower speed and less range.